EMBACOVER 55
Passive thermal protection
Reusable passive thermal protection for palletised cargo. It does not generate cooling or heat or maintain a fixed temperature. Selection depends on the goods, their initial temperature, the route and exposure conditions.
Format and construction
Reusable heat-sealed hood with no stitching. Optional Velcro base; side opening with Velcro or zip and nylon binding on request.
Documented technical data
| Property | Value stated in the sheet |
|---|---|
| Laminate, outside to inside | 12 µm metallised PET · adhesive · 12 × 12 mm polyester NET mesh · adhesive · 30 µm LDPE |
| Material weight and thickness | 53.9 g/m² · 46 µm; tolerance ±10% |
| Stated reflectivity | 85% |
| WVTR | <2 g/m² in 24 h at 38 °C and 90% RH (ASTM E398) |
| MD / TD tensile strength | 105 / 120 N/mm² (ASTM D882) |
| Seal strength | >30 N/15 mm (ASTM F88) |
Sizes and formats
| Documented reference | Cover without base (length × width × height, mm) |
|---|---|
| COV55SBA01 | 1200 × 1000 × 1200 |
| COV55SBA02 | 1200 × 1000 × 1600 |
| COV55SBA03 | 1200 × 1000 × 2000 |
| COV55SBE01 | 1200 × 800 × 1200 |
| COV55SBE02 | 1200 × 800 × 1600 |
| COV55SBE03 | 1200 × 800 × 2000 |
Custom manufacture is available on request for this model.
| Documented reference | Optional base (mm) |
|---|---|
| COV55BA | 1200 × 1000 |
| COV55BE | 1200 × 800 |
Scope of the data
The EMBACOVER 55 sheet declares food-contact compliance for its inner polyethylene face. This declaration does not extend to all references or other material faces. The food-contact PE face contains no recycled material; the sheet cites Regulation (EC) 1935/2004 and Regulation (EU) 10/2011. The sheet does not establish a protection duration or cargo temperature range. Material or component properties are not a test of a complete load.