BOX100 II: O₂ analyzer for MAP packaging (VIGAZ)
What it is for and who uses it
The BOX100 II is an analyzer that measures O₂ in modified atmosphere packaging. According to the VIGAZ data sheet, it is designed to be installed directly at the end of the production line or in the laboratory and to carry out a large number of measurements. A measurement is started at the press of a button and stops when the sensor has finished reacting; the value is then frozen, so each measurement is almost automatic.
Specifications
According to the VIGAZ technical data sheet:
| Parameter | Value |
|---|---|
| Measured gas | O₂ |
| O₂ sensor | Electrochemical · range 0-100 % · accuracy ±1 % relative · resolution 0.01 % · response (T90) 10 s · service life 4 years in air |
| Operating temperature | 0 to +40 °C |
| Protection | IP65 (closed) |
| Display | 4-line digital |
| Power supply | 230 V - 50/60 Hz |
| Dimensions | 22 x 16 x 10 cm |
| Weight | 1.4 kg |
| Functions | Automatic O₂ calibration in air at start-up (20.95 %) · calibration menu protected by a 4-digit security code · values locked after each measurement · blocked gas circuit detection (a light comes on if the filter or needle is blocked) · pump with programmable delay from 0 to 20 s; automatic mode: first 5 s suction and, if the measurement has not stabilised, a second 5 s suction · low sample withdrawal volume · long-life O₂ sensor |
| Calibration | With standard gases: O₂ zero / O₂ calibration |
| Supplied with | Spiral sampling kit · foams, filters and needles · calibration certificate and instructions for use |
Scroll horizontally to see the whole table.
Data according to the manufacturer's (VIGAZ) technical data sheet.
How it is used, according to the data sheet: insert the needle through a septum and press "P"; the pump draws the sample for the programmed time, an hourglass shows the progress of the measurement and, once the reading has stabilised, it is locked on the display. There is no need to draw in air between one measurement and the next.
Position in the range
The BOX100 II measures O₂ only. The VIGAZ range also includes the BOX120 II, which measures O₂ and CO₂, and the CANAL111 II (O₂) and CANAL121 III (O₂ and CO₂) models.
Documentation and contact
Request a quotation or the BOX100 II technical data sheet.
Enquire about the BOX100 II
Request a quotation or the BOX100 II data sheet.
VIGAZ use and documentation
According to VIGAZ, BOX100 II is intended for intensive production or laboratory use. Explore the analyzer range and the MAP oxygen analyzer guide.